User`s guide

3.1 Connect Line Cord
 Connect First Line Cord
 Connect Second Line Cord
Installing Your System
Line 1
L1/L2
L1/L2
L3/L4
Line 2
Lines
1&2
Connect one end of a long telephone
line cord to the jack on the bottom of
the telephone labeled L1/L2.
Connect the other end to the jack(s)
labeled Lines 1 & 2 either:
directly to the wall jack if it is a two-
line RJ14 jack
OR
to a two-line coupler (not provided) if
you have two single-line RJ11 jacks
for lines 1 and 2. Then connect the
two cords of the coupler to the corre-
sponding wall jacks. Two-line cou-
plers are available many places, for
example Radio Shack (part #279-
401).
Connect one end of a long telephone
line cord to the jack on the back of
the telephone labeled L3/L4.
Connect the other end to the wall
jack(s) labeled Lines 3 & 4 in the
same manner as described in the
previous step.
Note: If you are installing a 3-line
EP4300 telephone, or are connect-
ing a 4-line telephone to only 3 lines,
connect the other end of the line
cord directly to the wall jack labeled
Line 3.
1