User`s guide

30
 Storing a Caller ID number into memory:
To store a caller ID number into memory, follow the instructions for entering a num-
ber into memory, simply press REDIAL button. You may then press the soft key
under SCROLL to scroll through the Caller ID list. Press the memory button, where
you wish to store the number. Note that you can store caller ID names and num-
bers into private and shared directories as well into memory button locations.
 Predialing:
You may predial a call, which allows you to casually enter a telephone number and
check it in the display before it is dialed out. To make a predialed call, enter the
number using the dialpad while the telephone is on-hook, then lift the handset or
press the SPEAKER button or press the desired LINE button. If you make a mis-
take while dialing the number, you can use the DELETE button to erase digits one
at a time.
Note: To insert a dialing pause into predialing. Press “HOLD”. Each press of
HOLD will insert a 1.5 second pause, represented by a “,” in the display.
 Erasing numbers stored in memory:
To erase all memory dial numbers and personal directory numbers stored in
your telephone, press PROGRAM NEXT Enter code: *718, then press the
soft key under NEXT repeatedly, until “Advanced Setting” appears in the display,
and then press ENTER. “Erase Memory” will appear in the display. Press
ENTER. “Memory Dials” will appear in the display. Press the soft key under
ERASE. After a brief pause, the display will read “Erasing Done!” To erase the
shared directory numbers, at station #11 follow the above steps until you see
“Memory Dials” in the display. Press NEXT, and you will see “Shared Directory”
in the display. Press the soft key under ERASE. After a brief pause, the display will
read “Erasing Done!” To erase the toll restrictions stored in your telephone
follow the above steps until you see “Erase Memory” in the display. Press NEXT
repeatedly, until you see “Erase Toll Restr” in the display, and then press ENTER.
If you are not at station #11, you will be prompted to enter the toll restriction access
code. Do this, then press the soft key under ERASE. After a brief pause, the dis-
play will read “Erasing Done!”
Memory Dialing