User`s guide

27
6.3.2 To dial a personal directory number:
1 While the phone is on-hook and idle, press the “#” button.
- The display will read “
PPeerrssoonnaall DDiirr
.”
2 Use the right and left arrow buttons below the display to view the personal
directory entries.
Note: The directory is organized alphabetically, and you may jump to your desired
entry, or one close to it, by pressing the corresponding dialpad number. For exam-
ple, press the “5” dialpad button three times to jump to the first entry starting with
“L”. You can then use the right and left arrow buttons if needed to view the entries
starting at that point.
3 When the desired entry is displayed, you may dial it simply by lifting your
handset, or by pressing DIAL, or SPEAKER, or by pressing a desired LINE
button.
6.4 Using Shared Directory Dial
6.4.1 To store a shared directory dial number:
At Station #11:
1 Press PROGRAM.
2 Press the soft key under MEM.
- The display will read “
SSeelleecctt LLooccaattiioonn
”
3 Press the “*”button.
- The display will read “
EEmmppttyy LLooccaattiioonn
,”or indicate that the shared
directory is full.
4 Press the soft key under CHANGE if you wish to store a new number,
or press NEXT repeatedly until you see the previously stored entry you would
like to edit, and then press CHANGE.
5 Dial desired telephone number, and then press NEXT.
- The display will show the currently stored name, or indicate “
NNoo NNaammee
.”
6 Press the soft key under CHANGE if you wish to store a new name,
and then use the dialpad numbers and the soft keys to enter the name
to go along with the telephone number.
Memory Dialing