User`s guide

26
6.3 Using Personal Directory Dial
6.3.1 To store a personal directory dial number:
1 Press PROGRAM.
2 Press the soft key under MEM.
- The display will read “
SSeelleecctt LLooccaattiioonn
”
3 Press the “#” button.
- The display will read “
EEmmppttyy LLooccaattiioonn
,”or indicate that your personal
directory is full.
4 Press the soft key under CHANGE if you wish to store a new number, or press
NEXT repeatedly until you see the previously stored entry you would like to
change, and then press CHANGE.
5 Dial desired telephone number, and then press NEXT.
- The display will show the currently stored name, or indicate “
NNoo NNaammee
.”
6 Press the soft key under CHANGE if you wish to store a new name, and
then use the dialpad numbers and the soft keys to enter the name to go
along with the telephone number.
7 Press the soft key under SAVE.
You may store up to 10 personal directory dial telephone numbers at your tele-
phone.
Note that you can enter hyphens in your numbers for easy reading, as well as flash-
es and pauses (see page 29).
If you would like to erase the personal directory numbers stored in your phone,
please follow the instructions found on page 30.
Memory Dialing