User`s guide

6.2 Using Memory Dial

6.2.1 To store a memory dial number:

1 Press PROGRAM.

2 Press the soft key under MEM.

- The display will read

“Select Location”

3 Press the Memory button where

you wish to store the number,

or press LOWER followed by the

desired memory button if you wish

to store the number in a lower

memory location.

- The display will show the currently

stored number, or indicate “

EEmmppttyy LLooccaattiioonn””

.”

4 Press the soft key under CHANGE if you wish to store a new number.

5 Dial desired telephone number, up to 32 digits.

6 Press the soft key under SAVE.

Note: If you ever wish to erase the memory dial numbers stored in your phone,

please follow the instructions found on page 30.

You may store up to 16 telephone numbers at your telephone which you can dial

automatically with the press of a memory button.

Note that you can enter hyphens in your numbers for easy reading, as well as flash-

es and pauses (see page 29).

6.2.2 To dial a memory dial number:

1 Press the memory button where the desired telephone number is stored.

Or, Press LOWER followed by the desired memory button if you wish to dial a num-

ber stored in a lower memory location.

When you press a memory button, the speakerphone turns on automatically, and

the number is dialed out. You may lift the handset to switch to a handset call at any

time.

Memory Dialing

Press Memory but-

ton to dial numbers

in white spaces

Press LOWER,

then Memory button

to dial numbers in

gray spaces