User`s guide

23
You can use your headset to make or answer an outside call, an intercom call or a
page. Simply press the HEADSET button instead of lifting the handset.
During a call, you may switch back and forth between handset and headset and
speakerphone as much as you like.
Note that whenever the HEADSET indicator is on, you may hang up the handset
without disconnecting your call.
5.17
Adjusting Your T
elephone’s Time and Date
1 Press PROGRAM NEXT Enter code: *718.
2 Press the soft key under NEXT
repeatedly, until “
TTiimmee//DDaattee SSeett
”
appears in the display, and then
press ENTER.
3 Press the soft key under CHANGE,
then enter the time as instructed in
the display.
4 Press the soft key under NEXT,
then press CHANGE to choose
between AM or PM, then press
NEXT again.
5 Press the soft key under CHANGE, then enter the date as instructed
in the display.
6 Press PROGRAM to exit.
Note: If you subscribe to caller ID service from your local telephone company, then
there is no need to set the time and date for your telephone. This will be set auto-
matically by the caller ID information, and will be updated as new calls come in.
Operating Your System
If you subscribe to Caller ID service, then
the Date and Time is set automatically