User`s guide
22
5.15 Using the Call Timer
To view the elapsed time during your call:
Simply view the display, which will automatically display the elapsed
time during a call.
To restart the timer from zero:
Press the left arrow (<)button, which is found directly below the display.
To view the length of your previous five calls:
While the phone is on-hook and idle, press REDIAL. The display will show
the elapsed time of the previous call, along with its time and date.
Note that you can use the right arrow button under the display to view the lengths
of the previous five calls, along with their times and dates.
5.16 Using a Headset with your T
elephone
1 Press the HEADSET button to
activate the headset.
If you wish to override automatic
line selection, press the desired
LINE button instead of pressing the
HEADSET button, and you will be
connected to that line on the speak-
erphone. Then press the HEADSET
button to toggle to the headset.
2 Press HEADSET again to hang up.
Your EP4300 telephone is headset-ready. It comes equipped with a 2.5mm head-
set jack, and a built-in headset amplifier, along with a dedicated HEADSET button
Simply plug the accessory telephone headset with a 2.5 millimeter plug into the
headset jack, and you are all set. There is no need to buy a headset with a sepa-
rate amplifier.
Operating Your System
Use the HEADSET button to toggle
the headset on and off.