User`s guide

4.3.4 To completely restrict specific lines at a telephone:
1 Press PROGRAM NEXT Enter code: *718.
2 Press the soft key under NEXT repeatedly, until “
TToollll RReessttrriiccttiioonn
”
appears in the display, and then press ENTER.
- The display will read “
EEnntteerr CCooddee::
”
3 Enter the 4 digit toll restriction access code which was set at Station #11
(See page 5).
- You will hear a confirmation beep and the display will read “
SSeett
RReessttrriicctteedd
#”
4 Press the soft key under NEXT repeatedly, until “
LLiinnee RReessttrriiccttiioonn
”
appears in the display, and then press ENTER.
5 Press the soft key under CHANGE repeatedly, until the desired Line 1
Restriction setting is displayed.
The choices are:
L1: NORMAL (factory setting)
L1: RESTRICTED
6 Press the soft key under NEXT to see the current setting for Line 2, and
repeat steps 5 and 6 to change the settings for Lines 2-4.
7 Press PROGRAM to exit.
In addition to setting specific restrictions at a particular phone (See preceding
page), you may completely restrict any or all of the lines at a particular station.
People will not be able to make any outgoing calls on any lines that are complete-
ly restricted at a station, with the exception of the allowed numbers at that station
and calls to “911”. However, they will still be able to receive incoming calls on
these lines, take calls off hold, and have full use of the intercom.
The ability to completely restrict lines is useful in an office where you only want
people to make calls on certain lines at particular stations. You may also wish to
put one station in a public area, such as a lobby, and completely restrict all or most
of its lines.
Setting Up Your System
8