User`s guide

4.3.2 To set the restricted numbers at a particular telephone:
1 Press PROGRAM NEXT Enter code: *718.
2 Press the soft key under NEXT repeatedly, until “
TToollll RReessttrriiccttiioonn
”
appears in the display, and then press ENTER.
- The display will read “
EEnntteerr CCooddee
:”
3 Enter the 4 digit toll restriction access code which was set at Station #11
(See preceding page).
- You will hear a confirmation beep and will see “
SSeett RReessttrriicctteedd ##
”
4 Press ENTER
- The display will show the currently stored Restriction #1, or indicate
“1: ” if there is no Restriction #1 yet stored.
5 Press the soft key under CHANGE if you wish to store a new Restriction #1,
then dial desired restricted number, up to 6 digits.
6 Press the soft key under SAVE.
7 Press the soft key under NEXT and repeat steps 5-6 if you wish to store any
additional restrictions at this phone.
Toll restriction numbers are set individually at each station, so the restrictions can
vary from phone to phone.
Some examples of popular restrictions:
“1” ... to restrict all numbers starting with “1”.
“01” ... to restrict all international calls.
“0” ... to restrict all operator-assisted calls.
“#976” ... to restrict all “0976” and “1976” calls.
(When you enter restricted numbers, “#” is a wildcard that stands for the number
“0” or “1”.)
Note: Restrictions are usually just a few digits, since they prevent the dialing of all
numbers starting with those digits.
Setting Up Your System
6