User`s guide

4.3 Setting Up Toll Restriction
4.3.1 To set the system’s toll restriction access code:
At Station #11:
1 Press PROGRAM NEXT Enter code: *718.
2 Press the soft key under NEXT repeatedly, until “
TToollll RReessttrriiccttiioonn
”
appears in the display, and then press ENTER.
- The display will read “
AAcccceessss CCooddee::********
.”
3 Press the soft key under CHANGE if you wish to store a new access code.
4 Enter a 4 digit number.
5 Press PROGRAM to exit.
The Toll Restriction feature enables you to control outgoing calls and helps you pre-
vent unauthorized long distance calls.
If you ever forget the access code, simply set a new code at Station #11. Until you
set the access code, the code will be the one set at the factory, which is “1234”.
Note: After setting a station’s restrictions, its toll restriction is automatically ON.
Setting Up Your System
5