User`s guide

4.1 Setting Up Your System At A Glance
The following must be done at each station:
The following must be done at Station #11:
4.2 Setting Distinctive Ringing
1 Press PROGRAM NEXT Enter code: *718.
2 Press the soft key under NEXT repeatedly, until “
DDiissttiinnccttiivvee RRiinngg
”
appears in the display, and then press ENTER.
3 Press the soft key under CHANGE repeatedly, until the desired
distinctive ring setting for Line 1 is displayed.
The choices are:
L1:RING SOUND #1 (factory setting) through RING SOUND #8
4 Press the soft key under NEXT to see the current setting for Line 2,
and repeat steps 3 and 4 to change the settings for Lines 2-4.
5 Press PROGRAM to exit.
Note: At any time when you have a particular distinctive ring setting displayed, you
may press the soft key under HEAR to hear an example of that distinctive ring.
Setting Up Your System
Program
Set Distinctive Ringing
Toll Restriction
Select Intercom Ring, Voice
or Handsfree
Factory Setting
None Set
No Restrictions
Ring
Page
4
5-8
34
Program
Set Toll Restriction Access Code
Store Shared Directory
Dial Numbers
Name Stations
Factory Setting
1234
None Stored
None Named
Page
5
27
37
4