User manual

28
IP Address There are two modes under which the GXP-2000 can
operate:
If DHCP mode is enabled, then all the field values
for the Static IP mode are not used (even though
they are still saved in the Flash memory.) The GXP-
2000 will acquire its IP address from the first DHCP
server it discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account
settings need to be set. The GXP-2000 will attempt to
establish a PPPoE session if any of the PPPoE fields
is set.
If Static IP mode is enabled, then the IP address,
Subnet Mask, Default Router IP address, DNS
Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are set to
zero by default.
Speed Dial There are 7 speed dial fields that can be configured:
Name field is used to identify the person. It will be
displayed on LCD when pressing the corresponding
key.
UserID field is the number configured.
Account field is the SIP account associated with the
number.
Asterisk BLF Asterisk Busy Line Field feature needs the support of
Asterisk PBX. Please check Asterisk for more details.
Time Zone This parameter controls how the date/time is displayed
according to the specified time zone.
Daylight Savings Time This parameter controls whether the time will be displayed
in daylight savings time or not. If set to “Yes”, then the
displayed time will be 1 hour ahead of normal time.
LCD Backlight Always On Allow user to keep the LCD backlight on all the time.
Default is No.
Time Display Format LCD time display in 12 hour or 24 hour format
Date Display Format Allow user to choose among the following three formats:
Year-Month-Day
Month-Day-Year
Day-Month-Year
Display Clock instead of Date LCD displays clock if set to “Yes”. Default is No.