User manual

22
Menu Functions
Display “Preference”
Press Menu button to enter this sub menu including
“Do NOT Disturb” or
“Ring Tone” or
“Ring Volume” or
“Back”
DND (Do NOT Disturb) function could be turned on or off in the “DO NOT
Disturb” menu.
Choose different ring tones you prefer in the “Ring Tone” menu.
Adjust ring volume in the “Ring Volume” menu by using ‘Å’ and ‘Æ’ button.
Press ‘↓’ or ’↑’ to toggle the selection
Press Menu button to choose the menu item you want
Press ‘Å’ to return to the upper menu
Display “Configure”
Press Menu button to display the configuration items
“Network” or
“SIP” or
“Audio” or
“Upgrade” or
“Factory Reset”
Please check the web configuration page for more detail information about these
items
Press ‘↓’ or ’↑’ to toggle the selection
Press ‘Å’ to return the upper menu
Display “Factory Functions”
Press Menu to display the factory function items including
“Ethernet Loopback” or
“Audio Loopback” or
“Diagnostic Mode” or
“Back”
Press ‘↓’ or ’↑’ to toggle the selection
Press ‘Å’ to return to the upper menu
Display “Reboot”
Press Menu button to reboot the device
Display “Exit”
Press Menu button to exit the menu
Display “Ring Volume”
Press Menu button to hear the selected ring volume, press ‘Å’ or ’Æ’ to hear and
adjust the ring tone volume.
Press Menu button to select and exit, take effect immediately.