5-1993.fm Page 1 Wednesday, October 20, 1999 12:03 PM Cat. No. 15-1993 OWNER’S MANUAL 4-in-One Smart Light-Up Remote Control Please read before using this equipment.
15-1993.fm Page 2 Wednesday, October 20, 1999 12:03 PM FEATURES Your RadioShack 4-in-One Smart Light-Up Remote Control is a pre-programmed universal learning remote. It is both pre-programmed with the most commonly used commands, and equipped with "smart technology" that lets you customize your remote to meet your home entertainment needs. Its lighted keypad lets you easily see the remote's buttons in a dark room. When you turn on this feature, pressing any button lights the entire keypad.
15-1993.fm Page 3 Wednesday, October 20, 1999 12:03 PM CONTENTS Introduction ................................................ 4 Preparation ................................................. Installing Batteries .................................. Device Types .......................................... Setting Up Your Remote Control ............ To Operate Your TV/VCR Combination .. 5 5 6 6 7 Operation .................................................... 8 Using the Smart Technology ..................
15-1993.fm Page 4 Wednesday, October 20, 1999 12:03 PM INTRODUCTION Your RadioShack 4-in-One Smart Light-Up was designed to control the most commonly used functions on your TV, VCR, TV/VCR combination, cable converter, and CD player. It might not be able to duplicate some of your original remote control's seldom-used functions. When you set up the remote control, its command keys work like the keys on your original remote controls.
15-1993.fm Page 5 Wednesday, October 20, 1999 12:03 PM PREPARATION INSTALLING BATTERIES Your remote control requires four AAA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries. Cautions: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries or different types of batteries. • Do not press any of the remote control's keys while installing batteries.
15-1993.fm Page 6 Wednesday, October 20, 1999 12:03 PM ies. This can press keys for an extended period of time and reduce the battery life. DEVICE TYPES You can use the remote control's device keys to control the following types of devices: TV — TVs VCR — VCRs and TV/VCR combinations CBL — Cable converters, satellite systems AUX — CD Players, Home Automation SETTING UP YOUR REMOTE CONTROL 1.
15-1993.fm Page 7 Wednesday, October 20, 1999 12:03 PM 4. Point the remote control at your device and press POWER. Your device should turn off (or on, if it was off). If the remote does not operate your device, try the other codes listed in “Manufacturer Codes” on Page 17 for your brand of TV, VCR, cable converter, or CD player. 5. Repeat Steps 2–4 for additional devices. TO OPERATE YOUR TV/VCR COMBINATION 1.
15-1993.fm Page 8 Wednesday, October 20, 1999 12:03 PM OPERATION 1. Press the device key for the device you want to control. 2. Point the remote control toward the device you want to control, then press the desired command keys. 3. Repeat Steps 1 and 2 for all other devices you want to operate. Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might differ slightly. 4. To turn off the last device you selected, press POWER.
15-1993.fm Page 9 Wednesday, October 20, 1999 12:03 PM 1. Place your original remote control nose-tonose with the RadioShack Smart Light-Up Remote Control. 2. Hold down P until the red light blinks twice, then press 9 7 5. The red light blinks twice again. 3. Press the device key (TV, VCR, CBL, or AUX) for the mode where you want the function to reside. Note: You can program each smart key for a different function in each of the four modes.
15-1993.fm Page 10 Wednesday, October 20, 1999 12:03 PM DELETING LEARNED FUNCTIONS FROM SMART KEYS You can delete learned functions from the smart keys (1s, 2s, 3s, and 4s) to make room for other functions. 1. Hold down P until the red light blinks twice. 2. Press 9 7 6. The red light blinks twice. 3. Press the device key (TV, VCR, CBL, or AUX) where the learned function resides. 4. Press the smart key you programmed with the function twice to delete the learned function. The red light blinks twice.
15-1993.fm Page 11 Wednesday, October 20, 1999 12:03 PM function, repeat Steps 1–2, then press AUX twice. PUNCH-THROUGH The punch-through feature lets you alternately control two different devices without pressing the device keys for each one. A TV is often the only device that uses the volume keys. Punch-through allows you to control the TV’s volume while the 4-in-One is in any device mode.
15-1993.fm Page 12 Wednesday, October 20, 1999 12:03 PM FAVORITE CHANNEL SCAN You can use your remote control to scan through up to 10 of your favorite channels on your TV, VCR, or cable box. Note: You can scan channels only for one device (TV, VCR, cable converter) at a time. You cannot set up a favorite channel list for another device until you clear the existing list. 1. Press the device key for the device with the channels you want to program (TV, VCR, or CBL). The red light blinks. 2.
15-1993.fm Page 13 Wednesday, October 20, 1999 12:03 PM stopping on each channel for about 3 seconds. 6. Press any key other than SCAN when you see a channel you want to watch. Scanning stops. Clearing Favorite Channel Scan You must clear the channels in your favorite channel scan list if you want to change them. 1. Hold down P until the red light blinks twice. 2. Press 9 9 6, then hold down P until the red light blinks twice.
15-1993.fm Page 14 Wednesday, October 20, 1999 12:03 PM IF YOU HAVE PROBLEMS MANUAL CODE SEARCH If the 4-in-One Smart Light-Up Remote Control does not operate your remote-controlled devices when you first set it up, you might have to manually find the correct codes for your devices. You can try all the codes listed in “Manufacturer Codes” on Page 17 for your brand device, or you can follow these steps to search the remote control's entire library. 1. Manually turn on the device you want to set up. 2.
-1993.fm Page 15 Wednesday, October 20, 1999 12:03 PM If necessary, repeat these steps for each device. Note: Some VCRs and CD players do not have a POWER key on the original remote. If so, manually turn on the VCR, insert a tape or CD, and repeat the manual code search using PLAY instead of POWER. When the device responds, press P. The red light blinks twice.
15-1993.fm Page 16 Wednesday, October 20, 1999 12:03 PM TROUBLESHOOTING If the remote control stops working after you have successfully tested the control for each device, or if you are unable to get the remote control to work at all: • Be sure you press the device key for the device you want to control before you press any other key. • Confirm that your remote-controlled devices are working properly by using the original remote control or the manual controls. • Replace the batteries.
15-1993.
15-1993.
15-1993.
15-1993.fm Page 20 Wednesday, October 20, 1999 12:03 PM Manufacturer Emerson Code(s) Radio Shack Cat. No.
15-1993.fm Page 21 Wednesday, October 20, 1999 12:03 PM Manufacturer Optimus (continued) Code(s) Radio Shack Cat. No.
15-1993.fm Page 22 Wednesday, October 20, 1999 12:03 PM Manufacturer Yamaha Code(s) Radio Shack Cat. No.
15-1993.fm Page 23 Wednesday, October 20, 1999 12:03 PM Manufacturer Code(s) Radio Shack Cat. No.
15-1993.
15-1993.
15-1993.
15-1993.fm Page 27 Wednesday, October 20, 1999 12:03 PM Manufacturer Code(s) Proscan 0047 Proton 0178, 0003, 0466 Pulsar 0017, 0019 Quasar 0051, 0250, 0165, 0055 RCA 0047, 0051, 0093, 0019, 0090, 0135, 1047, 1147, 1247, 1347 Radio Shack 0047, 0154, 0019, 0039 Realistic Radio Shack Cat. No.
15-1993.
15-1993.
15-1993.
15-1993.fm Page 31 Wednesday, October 20, 1999 12:03 PM Manufacturer Memorex Code(s) Radio Shack Cat. No.
15-1993.
15-1993.fm Page 33 Wednesday, October 20, 1999 12:03 PM Manufacturer Realistic (continued) Code(s) 0047 16-506, 16-511, 16-512, 16-513, 16-515, 16-516, 16-518, 16-613, 16-614, 16-615, 16-652, 16-611, 16-612, 16-616, 16-653, 16-701, 16-702 0104 16-520, 16-521, 16-563, 16-617 0062 16-610, 16-700 0046 16-600, 16-601 0240 16-514 0066 16-503 0048 Ricoh Radio Shack Cat. No.
15-1993.
15-1993.fm Page 35 Wednesday, October 20, 1999 12:03 PM Manufacturer Code(s) Magnavox 0000, 0081 (TV: 0054) Magnin 0240 Memorex Radio Shack Cat. No.
15-1993.fm Page 36 Wednesday, October 20, 1999 12:03 PM CARE To enjoy your 4-in-One Smart Light-Up Remote Control for a long time: • Keep the remote control dry. If it gets wet, wipe it dry immediately. • Use and store the remote control only in normal temperature environments. • Handle the remote control gently and carefully. Don’t drop it. • Keep the remote control away from dust and dirt. • Wipe the remote control with a damp cloth occasionally to keep it looking new.
15-1993.fm Page 37 Wednesday, October 20, 1999 12:03 PM SPECIFICATIONS Power .................................... 4 AAA Batteries IR Control Range ........................... 26 ft. ±30° Dimensions (HWD) ...... 71/4 × 21/8 × 11/4 Inches (185 × 55 × 32 mm) Weight (Without Batteries) .. 4.1 oz. (116 gm) Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
15-1993.
15-1993.
15-1993.fm Page 40 Wednesday, October 20, 1999 12:03 PM Limited Ninety-Day Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack companyowned stores and authorized RadioShack franchisees and dealers.
