Owner`s manual

47
d.While you press and hold the left mouse button,
move the mouse left or right until the screen’s
right vertical cursor touches the point where the
next rising edge of the waveform intersects the
zero reference line.
e.When you select HERTZ, the value
represents the signal’s frequency. When you
select Seconds, the value represents
the time between the cursors.
Notes:
• You can click the tool bar button to toggle
between Hertz or Seconds.
• The timebase on the computer’s
Timebase
display changes with the grid overlay settings.
Time
—
Time
—
0.10000 KHz 10.0 ms
Hertz or Seconds
Time
—
Time
—
Hz
SEC
22-310.fm Page 47 Friday, August 6, 1999 12:26 PM