Owner`s manual

38
The frequency measurement will be inaccurate
if you set one vertical cursor to a rising edge
and the other to a falling edge.
c.When you select HERTZ, the value rep-
resents the signal’s frequency. When you select
Seconds, the value represents the
time between the cursors.
Notes:
• You can click the tool bar button to toggle
between Hertz or Seconds.
• The timebase on the computer’s
Timebase
display changes with the grid overlay settings.
One Cycle of the Waveform
Zero Reference Line
Time
—
Time
—
0.10000 KHz
10.0 ms
Hertz or Seconds
Time
—
Time
—
Hz
SEC
22-310.fm Page 38 Friday, August 6, 1999 12:26 PM