Owner`s manual

25
then press
MANUAL
again.
2. Press
▼
or
▲
to search
up or down from the
selected frequency.
3. When the scanner stops
on a transmission you
want to save, press
MON
to store the frequency in
the current monitor
memory. The monitor
memory number stops
flashing.
4. Press either
▼
or
▲
to
continue the search. If
you saved a frequency
in a monitor memory, the
monitor memory num-
ber advances by one
and starts flashing
again. (If the last monitor
memory was 10, the
scanner returns to moni-
tor memory 1.)
Notes:
• You can press
▼
or
▲
while
h
appears to
step through the fre-
quencies upward or
downward.
• If you tune to a search
skip frequency,
L/O
appears (see “Using
Search Skip Memory”
on Page 30).
USING MONITOR
MEMORY
Listening to a Monitor
Memory
To listen to the monitor
memories you stored during
a search, press
MANUAL
,
MON
, then the number of the
memory you want to listen
to. Use the
1–9
number keys
for memories 1–9, and
0
for
memory 10. Or repeatedly
press
MON
to cycle through
the stored monitor memo-
ries.
20-313.fm Page 25 Friday, January 7, 2000 3:09 PM