User`s guide

22
Scanning
Manually Selecting a Channel
You can continuously monitor a single channel
without scanning. This is useful if you want to
monitor a specific channel or if you hear an
emergency broadcast on a channel and do not
want to miss any details, even though there might
be periods of silence.
To directly access a channel:
1. Press MAN to stop scanning.
2. Enter the bank and channel number and press
MAN. The selected channel appears.
To stop at a channel while scanning:
1. Press MAN to stop scanning.
2. Press T or S to select the next or previous
channel.
3. Press SCAN to resume scanning.
Weather Scan
To scan for weather transmissions:
1. Press WX/
. WX appears. Change the
search direction by using T or S.
2. To stop the search, press PSE.
PAUSE
appears.
Weather Alert
1. Press WX/ to start the weather scan.
2. Press PRI/ALERT.
ALT appears.
If the scanner detects the 1050Hz weather alert
signal, it sounds an alarm for 5 minutes and
ALT
blinks. After the 5-minute alarm, the scanner
beeps every 10 seconds.
Press any key to turn off the alert. The audio turns
on so you can hear the weather broadcast.