User`s guide

19
Searching
Setting the Signal Stalker I Options
1. Press and hold TUNE/MENU to open the
menu.
2. Press T or S to select a Signal Stalker I menu
option. (The
icon appears with Signal
Stalker I menu options.)
Note: See below for a description of the
Signal Stalker I options.
3. Press ENT/PGM. The scanner flashes the
setting
On or OF (On or Off).
4. Press T or S to select
On or OF. Press ENT/
PGM.
5. Press T or S to select another option or
press CL to exit the menu mode.
Signal Stalker I Options
• ALErt: Alert. Set to On if you want to
hear an alert when Signal Stalker I finds a
frequency.
• Light: Backlight. Set to
On if you want the
backlight to flash when Signal Stalker I finds
a frequency.
• PGrSCr: Pager Screen. Set to
On if you want
to screen out common pager frequencies.
• Only: Only Mode. Set to
On to turn off
normal scanning while Signal Stalker I runs.
Set to
Off to continue normal scanning while
Signal Stalker I runs in the background.
• Lo bnd: Low Band. Set to
On to search VHF
Low Band (25-54MHz).
• Airbnd: AIR Band. Set to
On to search AIR
Band (108-137MHz).
• Hi bnd: High Band. Set to
On to search VHF
High Band (137-174MHz).