User`s guide

15
Searching
3. Using the number keys, enter the lower limit
frequency, and then press ENT/PGM.
4. Press T or S to move from lower to upper.
5. Using the number keys, enter the upper limit
frequency, and then press ENT/PGM.
Fine Tune
You can search up or down from the currently
displayed frequency using a fine tune search.
Searching stops when a transmission is found and
resumes after the transmission ends (searching
resumes after two seconds if delay is on).
1. When the frequency you want to start from
appears, press TUNE.
Or, from search pause mode, enter a
frequency using the number keys, then press
TUNE.
Note: If you enter an invalid frequency,
the scanner beeps and displays
Error.
2. SRCH, PAUSE, and -t- appear.
3. Press T or S to move up or down one
frequency step. Or press TUNE to start the
fine tune search.
4. Press T or S to change search direction.
5. Press PSE to pause the search.