Owner`s manual

PREPARATION
The scanner's sensitivity depends on
the antenna's length and various envi-
ronmental conditions. For the best re-
ception of the transmissions you want
to hear, adjust the antenna length.
This scanner is primarily designed for
use in the home as a base station.
You can place it on a desk, shelf, or
table.
Your scanner's front feet fold up or
down. Adjust them to give you the
best view of the display.
CONNECTING THE
ANTENNA
To attach the supplied telescoping an-
tenna, simply screw it clockwise into
the hole on the scanner's top.
6
Frequency Antenna Length
30-174 MHz
extend fully
380 - 512 MHz extend 2 segments
806 - 960 MHz collapse fully
(1 segment only)
Connecting an Optional
Antenna
The telescoping antenna is adequate
for strong local signals. But, for im-
proved reception, you can connect a
multi-band outdoor antenna (not sup-
plied) to the scanner. Your local Radio
Shack store sells a variety of anten-
nas. Choose the one that best meets
your needs.
When deciding on an outdoor base
antenna and its location, consider the
following:
• The location of the antenna should
be as high as possible.
• The antenna and antenna cable
should be as far as possible from
sources of electrical noise (appli-
ances, other radios, and so on).
• The antenna should be vertical for
the best performance.