Owner`s manual
Your PRO-2037 covers the following
bands:
30 - 50 MHz (VHF Lo)
50 - 54 MHz (6-Meter Ham Band)
118 - 136.975 MHz (Aircraft)
137 -144 MHz (Government)
144 - 148 MHz (2-Meter Ham Band)
148 -174 MHz (VHF Hi)
380 - 450 MHz (Ham Radio and Gov-
ernment)
450 - 470 MHz (UHF Lo)
470 - 512 MHz (UHF TV)
806 - 823.9875 MHz (UHF Hi)
849.0125 - 868.9875 MHz (UHF Hi)
894.0125 - 960 MHz (UHF Hi)
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). 0 USER·
SERVICEABLE PARTS INSIDE. REFER SERVICI G TO
QUALIFIED SERVICE PERSONNEl.
Warning: To reduce the risk of fire
or electric shock, do not expose
this appliance to rain or moisture.
FCC NOTICE
Your scanner might cause radio or TV
interference, even when it is operat-
ing properly. To determine whether
your scanner is causing the interfer-
ence, turn off your scanner.
If
the in-
terference goes away, your scanner is
causing the interference, Try to elimi-
nate the interference by:
• Moving your scanner away from
the receiver
• Connecting your scanner to an out-
let that is on a different electrical
circuit from the receiver,
• Contacting your local Radio Shack
store for help
If
you cannot eliminate the interfer-
ence, the FCC requires that you stop
using your scanner.
This device complies with Part 15 of
FCC Rules.
Operation is subject to
the following conditions: (1) This de-
vice must not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including
interference that may cause unde-
sired operation.
Ir\
This symbol is intended to
ill
alert you to the presence of
dangerous voltage inside the
product that presents a risk of electric
shock. Do not open the product's
case.
~!
This symbol is intended to tell
~ you that important operating
and maintenance instructions
are contained in this owner's manual.
3