Owner`s manual

,
TROUBLESHOOTING
Your PRO-2037 Programmable Scanner should require very little maintenance. If
you have problems, refer to this chart for possible solutions.
Problem Probable Cause
Solution
Scanner is totally in- The AC plug is not prop-
Check to see that the
operative. erly connected.
scanner is plugged into a
working AC outlet.
The optional DC power
Check to be sure the
adapter is not properly adapter is fully inserted
connected.
into the DC 13.8V jack.
Poor or no reception. Improperly connected an-
Check to be sure the an-
tenna.
tenna is properly con-
nected.
Poor reception.
Move the scanner to a lo-
cation with a better recep-
tion environment.
Incorrectly programmed Reprogram the frequen-
frequencies.
cies correctly.
Programmed frequen- Avoid programming frequen-
cies that are the same cies listed under "Birdie Fre-
as birdie frequencies.
quencies", or only listen to
them manually.
Error appears on
Programming error.
Reprogram the frequencies
the display.
correctly.
Keys do not work or
Undetermined error. Reset the scanner (see
display changes at
"Resetting/Initializing the
random.
Scanner").
Scanner is on but
The SQUELCH control is Adjust the SQUELCH con-
will not scan.
not correctly adjusted. trol clockwise (see "Turning
on the Scanner/Setting Vol-
ume and Squelch").
In the scan mode,
The SQUELCH control is Adjust the SQUELCH con-
the scanner locks on
not correctly adjusted. trol clockwise.
frequencies that
have an unclear
transmission.
If you cannot solve the problem, contact your local Radio Shack store for assistance.
28