Owner`s manual

SPECIAL FEATURES
CHANGING THE AM/FM
MODE
We designed your scanner to auto-
matically select the most common re-
ceive mode for each frequency range.
The default settings are:
FREQUENCY RECEIVE
(MHz) MODE
30.000 - 54.000
FM
118.000 - 136.975 AM
137.000 -174.000 FM
380.000 - 512.000 FM
806.000 - 960.000
FM
Although the preset mode is correct in
most cases, some ham radio and mili-
tary aircraft broadcasts do not receive
in the default mode. When the scan-
ner is not set to the correct receive
mode, the broadcast might sound
weak or distorted.
To change the mode, press AMlFM.
AM or FM blinks on the display when
you override the default mode.
MANUAL 1 2 3 4 5 6 7 8 9 10
BANK -
,,-, -,,-,-,r rn
,:' 'CH:,,:,e.:,uL'[]>M:
18
If you press AMlFM during a limit or
direct search, the scanner no longer
uses the default AM/FM mode for
each frequency. The scanner keeps
searching for frequencies in the se-
lected mode and AM or FM blinks on
the display. AM or FM blinks even if
the mode of a frequency is the same
as the default setting. To return to the
default settings, press AMlFM while
holding down CLEAR.
SCAN LIMIT AMlFM 1·20
o 0 CYG)
MANUAL PRIORITY 61·80
o @ 0 8)
LOCK OUT CLEAR 121·140
o ® C
Y
0
DELAY MONITOR PROGRAM 181·200
o 0 0 @
DELAY
Many agencies use a two-way radio
system that might have a pause be-
tween a query and a reply. Your scan-
ner's delay feature waits for 2
seconds after each transmission
while scanning or searching.
To program a 2-second delay for any
channel while scanning, manually se-
lect the channel and press DELAY un-
til DELAY appears on the display.
When your scanner stops on the
channel, it waits for 2 seconds after
each transmission before it resumes
scanning.
MANUAl 1 2 3 4 5 8 7 8 9 10
BANK - DElAY
:r:r " fur ru» n FM
L L CH ,-, -'.:'ULlu