Owner`s manual

Limit Search
Limit search lets you search for active
frequencies within a range you select,
so you can choose which ones you
want to store.
Note: You can use the scanner's de-
lay feature while using limit search
(see "Delay").
Follow these steps to search for ac-
tive frequencies.
1. Press PROGRAM, then LIMIT. Lo
appears on the display.
Lo
:J"" n rir» n FM PROGRAM
_I LI.LI U LI u
2. Using the number keys, enter the
lower limit of the frequency range.
Notes: If you enter an invalid fre-
quency in Step 2 or 4, Error ap-
pears on the display. Simply repeat
the step.
3. Press ENTER, then LIMIT. Hi ap-
pears on the display.
:-1,
CI C n nn "n FM PROGRAJ,I
_I U U. LI U LI u
4. Using the number keys, enter the
upper limit of the frequency range.
5. Press ENTER.
16
6. Press .• to search from the lower
to the upper limit, or press ..•. to
search from the upper to the lower
limit. -L-, SEARCH, and .• or ..•.
appear on the display.
MONITOR 1 2 3 4 5 6 7 8 • 10
X
I,-,nn"
10. U U LI [] AM
7. When the scanner stops on a
transmission, press MONITOR to
store the frequency in the current
monitor memory, or press .• or ..•.
to continue the search.
Direct Search
When the scanner is stopped on a
frequency, you can search up or down
from the current displayed frequency
to find more frequencies you want to
store.
Note: You can use the scanner's de-
lay feature while using direct search
(see "Delay").
1. Press MANUAL or PROGRAM.
MANUAL 1 2 3 4 5 I 7 8 • 10
BANK
""-1 nnnnn"
-,,: CHLI U U. LI '-.1 U []
2. Use the number keys to enter the
frequency you want to start the
search from. Or, use the number
keys to enter the channel number
containing the starting frequency.
Then press MANUAL or PROGRAM.