Owner`s manual

3. Using the number keys, enter the
frequency you want to store in that
channel.
4. Press ENTER to store the fre-
quency.
To tum on banks while scanning,
press the bank's number key until the
bar appears under the bank's number.
STORING
FREQUENCIES
Good references for active frequen-
cies are Radio Shack's "Police Call
Radio Guide Including Fire and Emer-
gency Services," "Official Aeronautical
Frequency Directory," and "Maritime
Frequency Directory." We update
these directories every year, so be
sure to get a current copy. See also
"Guide to the Action Bands" in this
manual.
If you do not have a reference to fre-
quencies in your area, you can use a
limit or direct search to find a trans-
mission.
You can store up to 200 frequencies
into your scanner's channels. Follow
these steps to store frequencies.
1. Press MANUAl. Enter the channel
number you want to program.
MANUAl. 12345678010
BANK -
'" riririrtrtrt
-I( CHLILlLI.LILlLIO
2. Press PROGRAM. PROGRAM ap-
pears on the display.
1 2 3 4 5 6 7 8 9 10
BANK -
,n ririrvnrm PROGRAM
ILl CHLlLILI.LILILIO
1 2 3 4 5 6 7 8 9 10
BA* -
In u: ir r ri FM PROGRAM
ILICH 10 1.0:ILlO
If you make a mistake in Step 3,
Error appears on the display.
Press CLEAR and repeat Steps 3
and 4.
5. Repeat Steps 1-4 to program more
channels or Steps 2-4 if you want
to program the next channel in se-
quence.
SEARCHING FOR AND
TEMPORARILY
STORING ACTIVE
FREQUENCIES
You can search for frequencies using
either of the following methods, then
temporarily store the frequencies in
monitor memories.
• Limit search (within a range of fre-
quencies you select)
• Direct search (any range of fre-
quencies before or after a fre-
quency you select)
15