Owner`s manual
3
Cloning the Programmed Data ................................................................................... 26
Initializing the Scanner ................................................................................................. 26
A General Guide to Scanning ...................................................................................... 27
Birdie Frequencies ....................................................................................................... 27
Frequency Conversion ................................................................................................ 27
Care ............................................................................................................................. 27
FAQs ............................................................................................................................28
In Case of Fault............................................................................................................ 28
Specifications .............................................................................................................. 28
FEATURES
Your new PSR-200 200 Channel VHF/Air/UHF Desktop Scanner lets you scan
conventional transmissions, and is preprogrammed with search banks for con-
venience. By pressing a One-Touch Service Search key, you can quickly search
those frequencies most commonly used by public service and other agencies
without tedious and complicated programming.
This scanner gives you direct access to over 22,000 exciting frequencies, in-
cluding those used by police and fire departments, ambulance services, air-
craft, and amateur radio, and you can change your selection at any time.
Your scanner also has these special features:
One-Touch Service Search Banks — let you search preset frequencies in
separate marine, fire/police, aircraft, ham, and weather banks, to make it easy
to locate specific types of calls.
Display Backlight — makes the scanner easy to read in low-light situations.
Lockout Function — lets you set your scanner to skip over specified channels
or frequencies when scanning or searching.
Ten Channel-Storage Banks — you can store 20 channels in each bank (200
total channels), letting you group channels so you can more easily identify
calls.
Tune — lets you tune for new and unlisted frequencies starting from a speci-
fied frequency.
SAME/FIPS Weather Alert — displays the weather event for the specific cities
or counties you choose so you can hear the alert tone.
Memory Backup — keeps the frequencies stored in memory for an extended
time during a power loss.
Scan Delay — delays scanning for about 2 seconds before moving to another
channel, so you can hear more replies that are transmitted on the same chan-
nel.