Owner`s manual

11
b X StorE – Appears when you program the frequency into desired vacant
channel.
CLOnE – Appears when the scanner stays in the clone mode.
-dUPL- – Appears when you try to store a frequency that is already stored in
another channel.
Error – Appears when you make an entry error.
FLo ALL-CL – Appears when you remove all the locked-out frequencies during
a FD/PD, AIR, or HAM band.
L-r – Appears when you review the locked-out frequencies.
L-O Fr-FULL – Appears when you try to lock out a frequency during a FD/PD,
AIR, HAM, or spectrum sweeper when 50 frequencies are already locked out.
oFF tonE – Appears when you turn the key tone off.
On tonE – Appears when you turn the key tone on.
P – Appears when the scanner is tuned to the priority channel.
-t- – Appears during a tune mode.
MAr – Appears about 2 seconds when you press MAR key.
FIrE – Appears about 1 second when you press FD/PD key.
PoLICE – Appears about 1 second when you press FD/PD key.
AIr – Appears about 2 seconds when you press AIR key.
HAM – Appears about 2 seconds when you press HAM key.
WEAthEr – Appears about 2 seconds when you press WX key.
Lo VHF – Appears when you turn on the low VHF sub-bank 1 while fire/police
bank searching.
Hi VHF – Appears when you turn on the high VHF sub-bank 2 while fire/police
bank searching.
UHF – Appears when you turn on the UHF sub-bank 3 while fire/police bank
searching.
10 M – Appears when you turn on the 10m sub-bank 1 while HAM bank search-
ing.
6 M – Appears when you turn on the 6m sub-bank 2 while HAM bank search-
ing.
2 M – Appears when you turn on the 2m sub-bank 3 while HAM bank search-
ing.
70CM – Appears when you turn on the 70cm sub-bank 4 while HAM bank
searching.