User`s guide

Scanning

Scanning sequentially checks all saved channels for activity. You must

save frequencies into channels to scan. The scanner does not scan

empty channels or unsaved frequencies.

You can increase the scanning speed by locking out channels with

continuous transmissions, such as a weather channel or turning off

entire banks. Turning off a bank prevents the scanner from scanning

any channels within the bank. You cannot turn off all banks. There

must be at least one active bank to scan.

To scan:

1. Press SCAN. The scanner checks all unlocked channels in the

active banks. To change the scan direction, press  or .

2. To stop on a channel, press PSE.

3. To lock out a channel, when the scanner stops on the channel,

press L/OUT.

4. To turn off a bank, press the bank’s number so the bank’s number

disappears. To turn on a bank, press the number key so the

bank’s number appears.

Locking Out Channels

You can increase the scanning speed by locking out channels with

continuous transmissions.

To locked out a channel:

1. Press MAN.

2. Enter the bank and channel number or use  or  to select the

channel.

3. Press L/OUT. “lo” changes to “LO.”

4. To unlock a locked-out channel, press L/OUT again.