User`s guide
15
FM – Frequency Modulation, used for most public safety
transmissions, broadcast, business, and amateur radio
transmissions.
CT – FM transmissions with Continuous Tone Coded Squelch
System (CTCSS)
DC – FM transmissions with Digital Coded Squelch (DCS)
MO – Motorola Trunking System
ED – EDACS Trunking System
LT – LTR Trunking System
If you change the receive mode using MODE key, the scanner
shows the receive mode for small caps (ex. fm, am, ct, or dc). If
you want to change the default setting, press FUNC then press
MODE.
Defining a Channel
Go to www.radioreference.com for the latest frequency references.
To dene a channel:
1. Press MAN.
2. Enter the bank (0-9) and channel number (00-99) where you want
to store the frequency (Example: 101 for Bank 1, Channel 1).
3. Press MAN again. M and the bank and channel number appear.
4. Press PROG. M changes to P.
5. Use the number keys to enter the frequency (including the
decimal point). If you make a mistake, press CL to delete a single
digit or hold CL about 2 seconds to start over.
Your scanner automatically rounds to the nearest valid
frequency. For example, if you enter 151.553, your scanner
rounds to 151.550.