User`s guide

3 216.0000-224.9950 5

4 225.0000-399.9875 12.5

5 400.0000-512.0000 6.25

6 764.0000-775.9875 12.5

7 794.0000-805.9875 12.5

8 806.0000-956.0000 12.5

9 1240.0000-1300.0000 12.5

starting chain search

1. Press SRCH. SRCH appears.

2. Press 0 – 9 to enable or disable the search bank number being searched.

Note: At least one bank needs to be entered. If you disable all the banks, the error tone

beeps.

3. Press to search down or to search up.

4. When the scanner stops on a transmission, quickly press PSE to stop searching to listen

to the transmission. “SRCH PAUSE” appears.

5. To release the hold and continue searching, press PAUSE.

Note: To step through the frequencies while “SRCH PAUSE” appears, press or .

storing found frequencies during chain search

You can store frequencies you find in chain search mode or chain search pause mode.

1. Press ENT/PGM when you find a frequency.

2. Press or to select a bank.

3. Press ENT/PGM the smallest empty channel number and “000.0000” and the frequency

you want to store are displayed..

3. Press ENT/PGM to enter the frequency. After programming, the scanner returns to the

previous mode.

programming search ranges

You can define the search range during a chain search in each search bank.

1. Press ENT/PGM to go to program mode.

2. Press SRCH to go to programming search bank mode.

3. Press or to select the bank number that you want. Press ENT/PGM.

4. Using the number keys, enter the lower limit frequency, and then press ENT/PGM.

5. Press or to move the cursor from lower to upper.

6. Using the number keys, enter the upper limit frequency, and then press ENT/PGM.

programming search bank text tag

You can customize your scanner by storing text tags (up to 16 characters) for easy

identification of search bank.

1. Press ENT/PGM to go to program mode.

2. Press SRCH to go to programming search bank mode.

3. Press ? or ? to select the desired bank number, and then press ENT/PGM.

4. Press TEXT to go to programming search bank text tag mode.

5. Press the number key and decimal key to edit desired search bank text tag. (See “text