User`s guide

63
Trunk Scanning
preset fleet maps to choose from, and it is best to
start with these when setting up a Type I or hybrid
trunk scanning bank.
If none of the following preset fleet maps allow
you to follow complete conversations, then you
probably need to program your own fleet map
(see “Programming a Custom Fleet Map” on p. 63).
Selecting a Preset Fleet Map
1. Press FUNC + MAN/MENU to open Menu
Mode.
2. Select Trunk Option, then press ENT/PGM.
Select a bank, then press ENT/PGM.
3. Select MOT, and press ENT/PGM.
4. Select Edit Fleet Map, and press ENT/PGM.
5. Select Preset, and press ENT/PGM.
6. Select the preset map you want to use and
press ENT/PGM. (See “Appendix B: Fleet Maps”
on p. 80 for a description of the preset fleet
maps).
Note: When the scanner searches for trans-
missions, Type I fleet and subfleet IDs such
as 100-12, 100-9, 000-12, or 400-8 display.
Programming a Custom Fleet Map
You must set the fleet map if you want to receive
a Motorola Type I system. Fleet maps are included
along with other information about Motorola Type
I systems at www.radioreference.com.
Follow these steps to program a custom fleet map.
1. Press ENT/PGM then TRUNK/MODE.
2. Press FUNC + T or S to select the desired
bank.
3. Press FUNC + 8, then select Custom and
press ENT/PGM.