User`s guide

56
Trunk Scanning
To enter an LTR ID:
1. Enter the area code.
2. Enter the home repeater number.
3. Enter the Use ID you want to store.
4. Press ENT/PGM.
Clearing Talk Group IDs
1. Press ENT/PGM then TRUNK/MODE to enter
the ID Programming Mode.
2. Press T or S to select the ID you want to clear.
3. Press CL. “Erase a Talk Group ID?” appears.
4. Press ENT/PGM to clear the ID. Press CL to
cancel.
Clearing All Talk Group IDs in a Bank
You can quickly delete all talk group IDs from a
bank if you want to use the bank to store different
data (such as a new set of talk group IDs).
1. Press ENT/PGM then TRUNK/MODE to enter
the ID Programming Mode.
3. Press FUNC + T or S to select a talk group
ID bank.
4. Press FUNC then 6. “Erase entire List?” appears.
5. Press ENT/PGM to clear the list. Press CL to
cancel.
Using Talk Group ID Lists
When you designate a bank as a trunking bank,
your scanner sets up 10 sub banks, which are
simply lists used to store your favorite talk group
IDs. Each list can contain up to 10 talk group IDs,
so you can store a total of 100 talk group IDs
for each trunking bank. If you use all the banks
as trunking banks, 2000 talk group IDs will be
available.