User`s guide

53
Trunk Scanning
5. If you want to unlock all lockouts at the same
time, select Unlock All after Step 2.
Manually Programming Talk Group IDs
1. Press ENT/PGM then TRUNK/MODE to enter
the ID Programming Mode.
2. Press FUNC + T or S to select the desired
bank.
3. Repeatedly press FUNC + TRUNK/MODE to
select MOT Mode, EDCS Mode, or LT Mode.
4. Repeatedly press TRUNK to select the ID List.
5. Press T or S to select the ID location within
the list.
6. Enter the talk group ID and press ENT/PGM
Use the decimal point for a hyphen if needed.
7. To create an optional ID tag, press PSE/TEXT,
enter the desired text for the ID, and press
ENT/PGM (see “Appendix A: Inputting Text” on
p. 79).
8. To store and program the next ID memory
in sequence, press T or S and repeat from
Step 6.
Notes:
• If you made a mistake in Step 6, “Invalid ID”
appears and the scanner beeps.
• You can enter either AFS or a decimal code
for ED (EDACS) IDs. When you press FUNC
then 2 at Step 6, the decimal format appears
for about 2 seconds. Now you can enter the
ID code with a decimal format.
• If you entered an ID code that is already
stored in another ID channel, “Duplicate ID, ID
Memory: X-X appears.” Press ENT/PGM to store
the ID code, press CL to cancel.