User`s guide

48
Trunk Scanning
5. Repeatedly press FUNC + TRUNK/MODE
to select MOT (Motorola), EDCS, LT, or EDCS
SCAT. This sets the talk group ID decoding
method to be used for the bank.
PGM BNKO9 T+
MOT mode
MT ID–O: –––––
ID List: O ON
DLY
P
5. Press ENT/PGM to enter Programming Mode.
6. Enter the desired trunking frequency then
press ENT/PGM to store.
7. Press FUNC + TRUNK/MODE to select the
appropriate mode (MO, ED, or LT).
PGM O9–OO T+
866.3875 MO
Scan Bank O9
DLY
P
8. To enter additional trunking frequencies as
subsequent channels in the same bank, press
ENT/PGM or S to access the next open
channel. Repeat steps 6 and 7 to enter the
frequencies. (See “Programming Frequencies
into Channels” on p. 16).
9. Press SCAN to start scanning.
Notes:
• If you enter a frequency that has already been
entered, the scanner sounds an error tone
and displays “Duplicate Freq.” and the channel
number. If the dual entry is an error press CL
and enter the correct frequency. If the dual
entry is intentional press ENT/PGM to accept.