User`s guide

40
Settings
Setting the Keytone
Each time you press any of the scanner’s keys, the
scanner sounds a tone. To turn the scanner’s key
tone on or off:
1. Press FUNC + MAN/MENU.
2. Select Key Tone and press ENT/PGM.
3. Select On or Off and press ENT/PGM.
4. Press MAN/MENU to exit the Menu Mode, or
press CL to go back to a previous menu.
Setting the Battery Save Function
The battery save feature conserves energy when
the scanner is set to monitor a manually selected
channel and it is not actively scanning. The
scanner repeatedly turns off the internal power for
one second, and then turns it back on for half a
second to check for a transmission.
To turn the battery save function on or off:
1. Press FUNC + MAN/MENU.
2. Select Battery Save and press ENT/PGM.
3. Select On or Off and press ENT/PGM.
4. Press MAN/MENU to exit the Menu Mode, or
press CL to go back to a previous menu.
Setting CTCSS/DCS
The CTCSS/DCS feature allows squelch to open
only when the tone you have programmed with
a specific frequency is received along with a
transmission. If the scanner detects the tone, it
displays the tone’s frequency and DCS code.
To turn the CTCSS/DCS feature on or off, Press
FUNC + CL/CTCSS/DCS. The scanner displays,
”CTCSS/DCS ON” or “CTCSS/DCS OFF” for one second.