User`s guide

32
Scanning
want to miss any details, even though there might
be periods of silence.
To directly access a channel:
1. Press MAN to stop scanning.
2. Enter the bank and channel number and press
MAN. The selected channel appears.
To stop at a channel while scanning:
1. Press MAN to stop scanning.
2. Press T or S to select the next or previous
channel.
3. Press SCAN to resume scanning.
Or
1. Press PSE.
2. During Pause Mode, you cannot select
another channel by pressing T or S.
3. Press PSE or SCAN to resume automatic
scanning.
Weather Scan
To scan for weather transmissions:
1. Press WX/ . WX appears. Change the scan
direction by pressing T or S.
2. To stop the scan, press PSE. PAUSE appears.
To set a weather alert, see “Receiving NWR-SAME and
Weather Alert Signals” on p. 43
Skywarn
The Skywarn function lets you jump directly to the
last channel in memory (Bank 19 #49) from any
mode. The scanner goes into Skywarn Mode and
starts receiving transmissions in the last channel.
Note: Before using this feature, program
the local Skywarn frequency for your area
into Bank 19, Channel 49.