User`s guide

28
Searching
To turn off Signal Stalker I and turn on normal
scanning, press and hold SCAN/ . The icon
disappears.
Note: Signal Stalker I doesn’t run in
weather search, program search range, or
Programming Mode.
Setting the Signal Stalker I Options
1. Press FUNC + MAN/MENU.
2. Select Signal Stalker and press ENT/PGM.
The Signal Stalker I options appear. (See the
following section for a description of the
options.)
3. Select the option you want to set and press
ENT/PGM.
4. Select On or Off and press ENT/PGM.
If you selected Band Switch, press T or S
to select the band you want to set. Press
ENT/PGM. Then select On or Off and press
ENT/PGM.
5. Press MAN/MENU to exit the Menu Mode, or
press CL to go back to a previous menu.
Signal Stalker I Options
• Alert Beep: Set to On if you want to hear an
alert when Signal Stalker I finds a frequency.
• Alert Light: Set to On if you want the
backlight to flash when Signal Stalker I finds
a frequency.