User`s guide

22
Searching
3. Press T to search down or S to search up.
4. When the scanner stops on a transmission,
quickly press PSE to stop searching and listen
to the transmission. SR6 PAUSE appears. To step
through the frequencies during search Pause
Mode, press T or S.
5. To release the hold and continue searching,
press PSE.
Storing Frequencies Found During a Search
To store frequencies you find in a search.
1. Press FUNC + ENT/PGM when you find a
frequency.
2. Press T or S to select a bank.
3. Press ENT/PGM. The frequency you want to
store, the smallest empty channel number,
and “0.0000” are displayed.
4. Press ENT/PGM to enter the frequency. After
programming, “Edit Ch Memor y?” appears. Press
ENT/PGM to go to Programming Mode, or
press CL to go back to a previous mode.
Programming Search Ranges
To define the search range for each search bank
during a chain search:
1. From Manual Mode, press ENT/PGM to put
the scanner in Programming Mode.
2. Press SRCH to go to Programming Search
Bank Mode.