User`s guide

Scanner Setup

5. Enter up to 16 letters by repeatedly pressing

the number keys. Press S or T to move the

cursor to the right or the left. Press [A/a] to

choose the input mode: upper case letters,

lower case letters, or numbers. (See “Appendix

A: Inputting Text on p. 79.)

6. Press ENT/PGM to store.

Entering Bank Text Tags

To store text tags for easy identiﬁcation of banks:

1. From Manual Mode, press ENT/PGM to put

the scanner in Programming Mode.

2. Press FUNC + S or T to select the bank

where you want to store a text tag.

3. Press FUNC + ENT/PGM. “Edit Bank Tag or Erase

All Freq.” appears.

4. Press PSE/TEXT to put the scanner into Bank

Text Tag Mode. The cursor appears.

5. Press the number keys to enter up to 16

letters. Press S or T to move the cursor to the

right or the left. Press [A/a] to choose the input

mode: upper case letters, lower case letters, or

numbers. (See “Appendix A: Inputting Text” on p. 79.)

6. Press ENT/PGM to store.

Erasing All Frequencies in a Bank

To erase all frequencies in a bank:

1. From Manual Mode, press ENT/PGM to put

the scanner in Programming Mode.