Operating instructions

95
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
Use the base unit. Make sure the base unit is not being used.
1
Press (FUNCTION).
2
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á
3
Scroll to “Set answering” by pressing Ö
or Ñ, press á.
4
Scroll to “Remote code” by pressing Ö or
Ñ.
5
Press á.
•The current setting is displayed.
6
Enter a remote code using a 2-digit
number (00–99).
7
Press á (Save).
•A beep sounds.
•If 3 beeps sound, the entered remote code is
the same as the password (p. 83). Start again
from step 6 and select another code.
•To exit the programming mode, press
(STOP/EXIT).
•You can exit the programming mode any time by pressing (STOP/EXIT)
.
To check the remote code
Repeat steps 1 to 5.
•The remote code is displayed. When finished, press (STOP/EXIT).
Remote code
:11
H
=Save
Recording time
H
Remote code
Set mailbox2&3
Set tel line
H
Set answering
---------------
Remote code
:35
H
=Save
Copy directory
H
Initial setting
---------------