Specifications

Chapter 4 - Record and Playback Basics
ADAT LX20 Reference Manual 39
Record-enabled tracks monitor
the…
Input signal Input while recording or stopped,
tape while playing
Non-record-enabled tracks
monitor the…
Tape Tape while playing or recording,
input signal when stopped
ALL INPUT
Selecting All Input causes all 8 tracks to monitor their inputs regardless of the
record-ready/auto-input status (section QQ). This is useful for live recording when
you’re more concerned with what’s going into the recorder than what’s recorded on
it. If both All Input and Auto Input are selected, All Input takes priority.
To enable All Input, press ALL INPUT until the Input Mon block shows All.
Operation You press… You see…
Have all tracks monitor the input
signal
ALL INPUT All blue Input indicators are lit
solid
Exit All Input mode ALL INPUT All blue Input indicators return to
their state prior to pressing ALL
INPUT