Service manual

1
Power Supply Removal / Replacement
The primary power supply for the F-6100 may be removed temporarily, when moving the
machine. This procedure also covers replacement of the power supply if required.
1) Shut down the F-6100 system normally. Unplug the power cord from the surge
protector or wall outlet.
2) Unplug the cable
from the underside of
the power supply.
Rotate the locking
collar counter-
clockwise and pull
downward to
disconnect.
3) Remove the two mounting bolts from the right side of the power supply mounting
plate, and the center bolt from the left side. Do NOT loosen or remove the two bolts
on the left side from the keyhole-slot openings. (see photo)
Do NOT
remove!
Remove these 3 bolts