Service manual

9
8) Screw the 3 plastic standoff posts back into the studs.
9) Plug the MEI ribbon cable into the socket; push alternately on each side of the plug
firmly upward on the cable plug until the locking tabs pivot downward. You should
hear an audible click when each tab has snapped into the locked postion.
10) Plug the adapter card into the MEI socket, and replace the 2 plastic Philips screws.
11) Replace the modem into its socket, and mount with cable ties (as above).
12) Power up the machine, and operate Motion Console, or make test cuts in the F-6100
program to verify proper operation of the MEI card.