Service manual

4) If the new fan does not have a heat-

sink attached, remove the four Philips

screws from the existing fan, and

transfer the heat sink to the new fan.

Align the fan and heat sink carefully,

and tighten the four screws.

5) Screw the new fan/sink assembly

into the socket on the

motherboard. Do not over-tighten!

6) Plug the intermediate and main connectors back into the appropriate sockets. Note:

the plugs and sockets are indexed, and cannot be plugged in backwards.

7) Replace the modem.

8) Turn on power to the F-6100, and visually confirm that the cooling fan is spinning.

Cooling fan and heat sink

Pentium CPU