Service manual

11
Remove both of the front bearing
eccentric axles in this manner.
Support the cart from below as you
remove the second bearing, and
carefully remove it from the lower X-
axis rails.
10) Manually check each of the rear bearings for smooth operation. Replace both
bearings at this time if you are unsure of their condition.
11) Optional: If the bearing cart itself has been damaged or found to be defective,
remove the two recessed mounting bolts that attach it to the stand off block (5mm
Allen wrench). Mount the block onto the new bearing cart in the same manner, using
care to align the ends so that they are flush. (Remove the front 2 bearings from the
new cart before attempting to re-assemble onto the frame rails.)
Figure X - Remove bearing with magnet