Handbook

ClearFill Star CDMA
1100187 Rev. 1.0
Page 91 of 152
Invoking Provisioning Templates
Click on the Provisioning tab
Click on the templates child tab. A table of templates will appear in the Display Panel as in
the screen shot above.
Perform any of the following procedures to start the execution of a template:
 Right-click a row on the table and select Provision
 Double-click a row on the table
 Click a row in the table and from the Templates menu, choose Provision
 Click a row in the table and press Shift + Ctrl + P
5.5.3.1.1 Add Clear Fill Object
The AddClearFillObj provisioning template can be used to add a ClearFill Object which was
not discovered during the discovery process or which was added to the network after
discovery had finished. Double click the template name to start procedure and follow this
walk through. See Figure 55 for the AddClearFillObj template.
Figure 55 AddClearFillObj provisioning template
Enter the IP address and NetMask of the Node to be added to the ClearFill®Star network.
Click on Next button to add the node to the NMS. It will appear in its relevant Network Map
shortly after the window has closed.