Handbook
Table Of Contents
- 1 Introduction
- 2 ClearFill®Star System Description
- 3 System Design Guidelines
- 3.1 CDMA Basics (in preparation)
- 3.2 Required information for system design
- 3.3 Design step by step
- 3.4 Estimated RF Coverage per RRH
- 3.5 Right-sizing - the beacon feature (in preparation)
- 3.6 Capacity demand - number for BSIs (in preparation)
- 3.7 System Architecture
- 4 System Installation
- 4.1 General
- 4.2 System Installation (Hardware Installation)
- 4.3 Installation Radio Remote Head (RRH)
- 4.4 Installation Gigabit Ethernet Switch (GES)
- 4.5 Installation Base Station Interface (BSI)
- 4.6 Installation NMS Server (Hardware)
- 4.7 Commissioning of NMS
- 5 NMS Overview
- 5.1 Introduction
- 5.2 Starting the NMS
- 5.3 Tools and Utilities of NMS server
- 5.4 Main Window of NMS Application Client (structure)
- 5.5 The NMS client functionality
- 5.6 Right Click Menus
- 5.7 RRH Configuration
- 5.8 BSI Configuration
- 6 Configuration Management
- 7 System Supervision
- 8 Remote Management and Supervision
- 9 Operational used cases/Maintenance
- 10 System Specifications and Technical Data
- 11 Conformance Statements
- 11.1 United States
- 11.1.1 Introduction
- 11.1.2 Federal Communications Commission (FCC)
- 11.1.3 FCC Part 15 Class A
- 11.1.4 RF approval
- 11.1.5 IEC product safety conformance
- 11.1.6 Indoor applications
- 11.1.7 Antenna exposure
- 11.1.8 Radiofrequency radiation exposure Information
- 11.1.9 Packaging collection and recovery requirements
- 11.1.10 Recycling / take-back / disposal of products and batteries
- 11.2 Canada
- 11.1 United States
- 12 Appendix
ClearFill Star CDMA
1100187 Rev. 1.0
Page 73 of 152
Simulations and Browsers
For expert Modus
Administrator Tools
For expert Modus
Reinitialize ClearFill NMS
Will clear all data bases and the log files on the server.
Utilities
This button opens a sub menu with the following Icons:
o Back
Navigate back to the main menu
o LDAP Client
For expert Modus
o Configuration File Checker
For expert Modus
o ObjectToRelational
For expert Modus
o Menu Configurator
For expert Modus
o I18N Editor
For expert Modus
o Discovery Configurator
To discover the nodes on the network correctly, it is necessary to setup the
network discovery when starting the NMS software the first time. Open
“Utilities” and open up the “Discovery Configurator”.
Start ClearFill NMS Server
To start the NMS, double-click on the icon. In the lower window, the task in progress
will be displayed and an additional window (Apache) is opened. This window is to be
minimized. When “Please connect your client to the web server on port 9090” is
displayed, double-click the icon “Application Client” to start the client.
Application Client Starting
Double clicking this icon will start the NMS. When the applications client is started,
the log in window will appear (see section 5.3.3).
5.3.2 Discovery Configurator
After starting the Discovery Configurator via the Web NMS Launcher (see section 5.3.1,
submenu utilities) a multi tabbed window opens, initially displaying the General tab.