Handbook
Table Of Contents
- 1 Introduction
- 2 ClearFill®Star System Description
- 3 System Design Guidelines
- 3.1 CDMA Basics (in preparation)
- 3.2 Required information for system design
- 3.3 Design step by step
- 3.4 Estimated RF Coverage per RRH
- 3.5 Right-sizing - the beacon feature (in preparation)
- 3.6 Capacity demand - number for BSIs (in preparation)
- 3.7 System Architecture
- 4 System Installation
- 4.1 General
- 4.2 System Installation (Hardware Installation)
- 4.3 Installation Radio Remote Head (RRH)
- 4.4 Installation Gigabit Ethernet Switch (GES)
- 4.5 Installation Base Station Interface (BSI)
- 4.6 Installation NMS Server (Hardware)
- 4.7 Commissioning of NMS
- 5 NMS Overview
- 5.1 Introduction
- 5.2 Starting the NMS
- 5.3 Tools and Utilities of NMS server
- 5.4 Main Window of NMS Application Client (structure)
- 5.5 The NMS client functionality
- 5.6 Right Click Menus
- 5.7 RRH Configuration
- 5.8 BSI Configuration
- 6 Configuration Management
- 7 System Supervision
- 8 Remote Management and Supervision
- 9 Operational used cases/Maintenance
- 10 System Specifications and Technical Data
- 11 Conformance Statements
- 11.1 United States
- 11.1.1 Introduction
- 11.1.2 Federal Communications Commission (FCC)
- 11.1.3 FCC Part 15 Class A
- 11.1.4 RF approval
- 11.1.5 IEC product safety conformance
- 11.1.6 Indoor applications
- 11.1.7 Antenna exposure
- 11.1.8 Radiofrequency radiation exposure Information
- 11.1.9 Packaging collection and recovery requirements
- 11.1.10 Recycling / take-back / disposal of products and batteries
- 11.2 Canada
- 11.1 United States
- 12 Appendix
ClearFill Star CDMA
1100187 Rev. 1.0
Page 67 of 152
36. All other fields are set to default values:
a. PVID = “1”
b. Rule 1 = “disable”
c. Rule 2 = “disable”
d. “Untag VID” = “1”
37. To finish and store the GES configuration click on Reboot on the left hand side menu.
38. Click on “Save and Reboot” in the left hand side menu.
Repeat this procedure with every GES in the network. Start with the switch that is closest to
the BSIs (root switch) and follow the network topology to the GES that has the longest
topological distance to the BSI (access switches).
After following this procedure all GES are ready for VLAN tag usage.
4.7.3.5 Start NMS server for a first check
Please use keyboard and monitor attached to the started NMS server (see 4.7.1-Start of
NMS Server).
1.
The operating system prompts for a password.
Default password is: nmsadmin.
After first login please change password according to corporate security
guidelines.
2. Start the WEB NMS Launcher by clicking on the appropriate icon.
3. The NMS server is running an automatic device discovery routine. This routine should
have automatically detected all devices within approximately 30 min. Please wait until
discovery has finished and all elements of your topology are displayed.
4. Click on “Application Client” within the appearing Web NMS Launcher window (see
Figure 36 Web NMS Launcher). The client is started.