Handbook
Table Of Contents
- 1 Introduction
- 2 ClearFill®Star System Description
- 3 System Design Guidelines
- 3.1 CDMA Basics (in preparation)
- 3.2 Required information for system design
- 3.3 Design step by step
- 3.4 Estimated RF Coverage per RRH
- 3.5 Right-sizing - the beacon feature (in preparation)
- 3.6 Capacity demand - number for BSIs (in preparation)
- 3.7 System Architecture
- 4 System Installation
- 4.1 General
- 4.2 System Installation (Hardware Installation)
- 4.3 Installation Radio Remote Head (RRH)
- 4.4 Installation Gigabit Ethernet Switch (GES)
- 4.5 Installation Base Station Interface (BSI)
- 4.6 Installation NMS Server (Hardware)
- 4.7 Commissioning of NMS
- 5 NMS Overview
- 5.1 Introduction
- 5.2 Starting the NMS
- 5.3 Tools and Utilities of NMS server
- 5.4 Main Window of NMS Application Client (structure)
- 5.5 The NMS client functionality
- 5.6 Right Click Menus
- 5.7 RRH Configuration
- 5.8 BSI Configuration
- 6 Configuration Management
- 7 System Supervision
- 8 Remote Management and Supervision
- 9 Operational used cases/Maintenance
- 10 System Specifications and Technical Data
- 11 Conformance Statements
- 11.1 United States
- 11.1.1 Introduction
- 11.1.2 Federal Communications Commission (FCC)
- 11.1.3 FCC Part 15 Class A
- 11.1.4 RF approval
- 11.1.5 IEC product safety conformance
- 11.1.6 Indoor applications
- 11.1.7 Antenna exposure
- 11.1.8 Radiofrequency radiation exposure Information
- 11.1.9 Packaging collection and recovery requirements
- 11.1.10 Recycling / take-back / disposal of products and batteries
- 11.2 Canada
- 11.1 United States
- 12 Appendix
ClearFill Star CDMA
1100187 Rev. 1.0
Page 21 of 152
2.3.2 Sectorization
The sectorization is configured via the GES. The procedure for VLAN configuration is
described in section 4.7.3.4-VLAN Configuration of GES.
In a system containing several BSIs the assignment of each RRHs to a BSI
(sectorization) is configurable by VLAN (Figure 10).
The VLAN configuration / sectorization is done via NMS.
VLAN1
Transport
Network
RRH
BSI 1
BSI 2
BSI n
.
.
.
.
RRH
.
.
.
.
VLAN2
RRH
RRH
.
.
.
.
VLAN n
RRH
RRH
.
.
.
.
Figure 10 Illustration of CDMA channel assignment to RRH via VLAN.
The system supports:
Port-based VLAN
IEEE802.1Q Tag VLAN
256 active VLANs
VLAN ID 1~4094
Note: Each RF carrier needs an individual VLAN, consisting of one BSI and a number of
RRHs. The maximum number of RF carriers transported on the same Ethernet is limited by
the maximum data rate of 1Gbit/s.